enkidec@enkidec.com Monza · Bozzolo, Italy Mon–Fri 8:00–18:00 CET
Tanks and piping of an industrial water recovery and reuse plant
We design and build
Key takeaways

A water reuse plant polishes treated wastewater (or a segregated process stream) to the quality required by its end use: washing, cooling, boilers, process. The typical train is pre-treatment, UF or MBR, reverse osmosis, disinfection. ENKIDEC designs and supplies the plant, including compact skid-mounted or containerised units, through to start-up.

60–90%of wastewater recoverable, depending on effluent and end use
Skid / containercompact, factory-tested units
Turnkeyfrom design to start-up

Why reuse water

Droughts, abstraction limits and rising tariffs make water a cost and a business-continuity risk. Reusing wastewater cuts abstraction, cuts discharge volumes and costs, and gives measurable ESG results.

What we build

Complete recovery plants sized on the real effluent and the end use: washing water (filtration, UF, disinfection), cooling and closed loops (UF, softening or RO), process and boiler feed water (UF or MBR, RO, polishing), irrigation and civil uses, and Zero Liquid Discharge (high-recovery RO, evaporation, crystallisation).

Plants can be skid-mounted or containerised: delivered pre-assembled and factory-tested, connected in days and expandable in modules. See our skid-mounted and containerised plants.

How we work

  1. Water balance and recoverable volumes
  2. Effluent analysis and pilot tests when needed
  3. Design and proposal with cost per recovered m³ and payback
  4. Construction, installation, testing and start-up
  5. Operator training, support and optional operation
Pipework of a water treatment plant
FAQ

FAQ on water recovery and reuse

Answers to the questions plant managers, engineering and HSE teams ask us most often.

Request a consultation
Does ENKIDEC build the plant?

Yes. We design and supply the recovery plant, including skid-mounted or containerised units, and follow it through testing and start-up with a single point of contact.

How much water can be recovered?

Depending on the effluent and the required quality, many industrial sites recover 60–90% of discharged water. We confirm it with a water balance and analyses first.

Can it be installed without stopping production?

Yes. Skid-mounted and containerised units are assembled and tested off site and connected quickly.

Insights

Related services

Follow ENKIDEC on LinkedIn

Weekly insights on regulation, technologies and real projects in water, wastewater and biomethane.

Follow on LinkedIn
Next step

Do you have a plant to design, permit or bring back to performance?

Tell us about it in a 30-minute call: we will tell you where to start, which data you need and which options to compare.